All traction parasails from SoaringEagle are made of customized special fabrics, focusing on performance and experience. They are comprehensively optimized from materials, quality control to design, and suitable for various outdoor flying scenarios.

I. Core Canopy: Custom Materials Lay the Foundation for Core Performance Advantages

The canopy is made of Type 66 tear-resistant nylon through special weaving and silicone coating processes, featuring light weight, high tear resistance, corrosion resistance and high airtightness. All color options have uniform strength and multiple colors are available.

The customized fabric greatly reduces the parasail weight, enabling stable flight and longer airtime in light wind, while improving maneuverability and load capacity to optimize the flying experience.

II. Quality Assurance: High-Standard Production + Comprehensive Testing

All traction parasails are produced in accordance with the highest standards and undergo double testing before leaving the factory: indoor static data and detail testing, outdoor dynamic testing of lift/load capacity/stability, and simultaneous calibration of the balance of the canopy, lines and exhaust holes to ensure quality and safety.

III. Core Components: Refined Design Balancing Durability and Convenience

（1）Parachute Lines & Center Lines: Tough, Durable & Easy to Operate with Color Coding

Each model comes standard with 20 parachute lines + 2 center lines, all made of high-strength nylon through special weaving. Multiple regular colors are available and customization is supported.

Color coding is adopted for easy deployment and stowage: the 2 middle lines on the leading edge are red on the left and green on the right, the 2 middle lines on the trailing edge are blue, the center lines are yellow with sleeve weaving, and the remaining 14 lines match the main color of the parasail.

（2）Parasail Harness & Hardware: Sturdy, Adaptable & Suitable for Practical Operation

Harness: Available in customized Dyneema and high-strength nylon versions, made of integral uninterrupted three-layer loop sewing, tough and durable; the connection is reinforced for wear resistance, suitable for harsh environments.

Markings & Attachment Points: Attachment points are sewn with the same material for wear resistance, red L on the left (corresponding to the port side of the ship) and green R on the right (corresponding to the starboard side), easy to operate; the top webbing has no additional color matching, in line with the overall aesthetics.

Hardware: All made of 316 stainless steel, corrosion-resistant and high load-bearing.

Manned Configuration: Standard with double passenger suspension points, enabling double passenger tandem flight without additional tandem beams.

IV. Humanized Design: Adjustment Buckles for Precise Optimization of Flight Attitude

The entire series is equipped with adjustment buckles (located at the front C-shaped panel), which can simultaneously correct the flight attitude and adjust the canopy pressure, solving the problem of flight deviation caused by long-term use or incorrect operation.

Note: The “lift improvement” perceived when closing the buckles on both sides is actually the effect of additional canopy pressure.